Operation Manual

Page 65GX1150
14 MAINTENANCE
The inherent quality of the solid-state components used in this transceiver will
provide many years of continuous use. Taking the following precautions how-
ever, will prevent damage to the transceiver.
• Keep the microphone connected or the jack covered at all times to prevent
corrosion of electrical contacts;
• Never key the microphone unless an antenna or suitable dummy load is
connected to the transceiver.
• Ensure that the supply voltage to the transceiver does not exceed 16 VDC
or fall below 11 VDC.
• Use only STANDARD HORIZON-approved accessories and replacement
parts.
In the unlikely event of serious problems, please contact your Dealer or our
repair facility.
14.1 REPLACEMENT PARTS
Occasionally an owner needs a replacement mounting bracket or knob.
These can be ordered from our Parts Department by writing or calling (in USA
or Canada), or Standard Horizon authorized dealers (outside USA or Canada).
Marine Division of YAESU U.S.A.
6125 Phyllis Drive, Cypress, California 90630, U.S.A.
Telephone [phone] ext 6800
Commonly requested parts, and their part numbers are listed below.
• Power Cord: T9025406
• VOL/SQL Knob
(
Black
)
: RA097700A
• VOL/SQL Knob
(
White
)
: RA097310A
• Mounting Bracket
(
Black
)
: RA0978400
• Mounting Bracket
(
White
)
: RA0978300
• Mounting Bracket Knob
(
Black
)
: RA0978600
• Mounting Bracket Knob
(
White
)
: RA0978500
• Microphone Hanger
(
Black
)
: RA0458800
• Microphone Hanger
(
White
)
: RA0436000