Operation Manual

GX1150Page 58
12.10 DSC TRANSMISSION TEST
Use the following procedure to ensure the DSC feature are functioning with
another DSC radio.
1. Press the key. The “DSC MENU” will appear in
the display.
2. Press the / keys to select the “DSC TEST”.
3. Press the key, then select the station (name or
MMSI number) to be sent the test signal with the
/ keys. This directory uses the Individual
Directory information.
4. If “Manual” is selected in the previous step, enter
the MMSI number (nine digits) which you want to
send the test signal to. To do this, press the /
keys to scroll through numbers “0-9,” then
press the key to move the entry location to the
right. If a mistake was made entering in the MMSI number, repeat pressing
the microphone’s key until the wrong number is selected, then press
the / keys to correct the entry. When finished entering the MMSI
number, press and hold the key.
5. Press the key again to transmit the Test sig-
nal.
6. After the DSC TEST call is transmitted, the
GX1150 waits for a reply from the radio which was
called, the display will show “WAIT FOR ACK”.
7. When and acknowledgement call is received, the
GX1150 will produce a ringing sound and the dis-
play will show the bottom display to the right.
8. Press the key to return the display to the radio
operation mode display.