Operation Manual

Page 55GX1150
12.9 POSITION REPORT
The feature is similar to Position Request, however instead of requesting a
position of another vessel this function allows you to send your position to
another vessel. In order to send your position you need to have a GPS re-
ceiver connected or to have manually input your position. See section “12.11
MANUAL INPUTTING OF THE GPS LOCATION.”
12.9.1 Setting up a Position Report Ringer
The GX1150 has the capability to turn off the Position Report ringer.
1. Press and hold down the key until
“SETUP MENU” appears.
2. Press the / keys to select “DSC
SETUP” menu.
3. Press the key, then select “DSC BEEP”
with the / keys.
4. Press the key.
5. Press the / keys to select “POSI-
TION REPORT”.
6. Press the
[
ENT
]
key.
7. Press the / keys to select “OFF”.
8. Press the key to store the selected setting.
9. To exit this menu and return to radio operation
mode press the key.
To enable the Position Report Ringer, repeat the above
procedure, pressing the / keys to select “ON”
in step “7” above.