Operation Manual
Page 47GX1150
6. Press the / keys to scroll through the first
letter of the group name you want to reference in
the directory.
7. Press the key to store the first letter in the name
and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete.
The name can consist of up to eleven characters,
if you do not use all eleven characters press the
key to move to the next space. This method
can also be used to enter a blank space in the
name. To clear the previous letter, press the
key.
9. After the eleventh letter or space has been entered, press and hold the
key to advance to the MMSI number (Maritime Mobile Service Identity Num-
ber) entry.
10. Press the / keys to scroll through numbers, 0-9. To enter the de-
sired number and move one space to the right press the key. Repeat
this procedure until all nine space of the MMSI number are entered.
11. If a mistake was made entering in the name or the MMSI number repeat
pressing the microphone’s key until the wrong character is selected,
then press the or key to enter the correct letter or number.
12. To store the data entered, press and hold the
key.
13. To enter another individual address, repeat steps
4 through 12.
14. To exit this menu and return to radio operation mode press the key.
12.7.2 Transmitting a Group Call
Pre-Programmable Calling
1. Press the key. The “DSC MENU” will ap-
pear.
2. Press the / keys to select “GROUP”.
(To cancel, press the key or key.)
3. Press the key. The transceiver will beep, and
the “Group Directory” will appear.
4. Press the / keys to select the “Group” you
want to contact.
5. Press the key, then press the / keys to
select the operating channel you want to commu-
nicate on and press the key.