Operation Manual

GX1150Page 38
one space to the right press the key. Repeat this procedure until all nine
spaces of the MMSI number are entered.
11. If a mistake was made entering in the name or the MMSI number, press the
microphone’s key repeatedly until the wrong character is selected,
then press the / keys to correct the entry.
12. To store the data entered, press and hold the
key.
13. To enter another individual address, repeat steps
4 through 12.
14. To exit this menu and return to radio operation mode press the key.
12.5.2 Setting up Individual Reply
Allows setting up the radio to automatically (default setting) or manually re-
spond to a DSC Individual call requesting you to switch to a working channel
for voice communications. When Manual is selected the MMSI of the calling
vessel is shown allowing you to see who is calling. This function is similar to
caller id on a cellular phone.
1. Press and hold down the key until
“SETUP MENU” appears.
2. Press the / keys to select “DSC
SETUP” menu.
3. Press the key, then select “INDIV REPLY”
with the / keys.
4. Press the key.
5. Turn the / keys to select “AUTO” or
“MANUAL.”
6. Press the key to store the selected set-
ting.
7. To exit this menu and return to radio operation
mode press the key.