Operation Manual

GX1150Page 36
12.4.2 Receiving an All Ships Call
1. When an All Ships Call is received, an emergency alarm sounds.
The display will show the MMSI (or name) of the
vessel transmitting the All Ships Call.
2. Press any of the keys on the radio to stop the
alarm.
3. To show the nature of the call of the vessel, press
the key.
4. If a key is not pressed for thirty seconds after an
All Ships call is received, the GX1150 will auto-
matically switch to the requested channel for you to monitor communica-
tions.
5. To immediately switch to requested channel, press the key.
6. If you want the radio to stay on the channel you
were on before receiving the All Ships call, press
the key.
7. Press the key to display the operating channel
number of the requested channel.
8. Press the PTT switch on the microphone and talk
to the calling ship.