Operation Manual

GX1100SPage 62
13 MAINTENANCE
The inherent quality of the solid-state components used in this transceiver will
provide many years of continuous use. Taking the following precautions how-
ever, will prevent damage to the transceiver.
• Keep the microphone connected or the jack covered at all times to prevent
corrosion of electrical contacts;
• Never key the microphone unless an antenna or suitable dummy load is
connected to the transceiver.
• Ensure that the supply voltage to the transceiver does not exceed 16 VDC
or fall below 11 VDC.
• Use only STANDARD HORIZON-approved accessories and replacement
parts.
In the unlikely event of serious problems, please contact your Dealer or our
repair facility.
13.1 REPLACEMENT PARTS
Occasionally an owner needs a replacement mounting bracket or knob.
These can be ordered from our Parts Department by writing or calling (in USA
or Canada), or Standard Horizon/Vertex Standard authorized dealers (outside
USA or Canada).
Marine Division of Vertex Standard
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
Telephone [phone]
Commonly requested parts, and their part numbers are listed below.
• Power Cord: T9025406
• VOL/SQL Knob
(
Black
)
: RA0757600
• VOL/SQL Knob
(
White
)
: RA0763500
• Mounting Bracket
(
Black
)
: RA0784000
• Mounting Bracket
(
White
)
: RA0784100
• Mounting Bracket Knob
(
Black
)
: RA045910A
• Mounting Bracket Knob
(
White
)
: RA043770A
• Microphone Hanger
(
Black
)
: RA0458800
• Microphone Hanger
(
White
)
: RA0436000