Operation Manual

GX1100SPage 52
11.9 POSITION REPORT
The feature is similar to Position Request, however instead of requesting a
position of another vessel this function allows you to send your position to an-
other vessel. In order to send your position you need to have a GPS receiver
connected or to have manually input your position. See section “11.11 MANUAL
INPUTTING OF THE GPS LOCATION.”
11.9.1 Setting up a Position Report Ringer
The GX1100S has the capability to turn off the Position Report ringer.
1. Press and hold down the
[
CALL
(
MENU
)]
key until “
SETUP MENUSETUP MENU
SETUP MENUSETUP MENU
SETUP MENU” appears.
2. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to
select “
DSC SETUPDSC SETUP
DSC SETUPDSC SETUP
DSC SETUP” menu.
3. Press the
[
ENT
]
key, then select “
DSC BEEPDSC BEEP
DSC BEEPDSC BEEP
DSC BEEP”
with the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys.
4. Press the
[
ENT
]
key.
5. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to
select “
POSITION REPORTPOSITION REPORT
POSITION REPORTPOSITION REPORT
POSITION REPORT”.
6. Press the
[
ENT
]
key.
7. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to select
“
OFFOFF
OFFOFF
OFF”.
8. Press the
[
ENT
]
key to store the selected setting.
9. To exit this menu and return to radio operation
mode press the
[
16/9
]
key.
If you wish to return to enabling the ringer tone, just
repeat the above procedure, pressing the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to select “
ONON
ONON
ON” in step “7” above.