Operation Manual

Page 49GX1100S
The GX1100S has the capability to turn off the Position Request ringer.
1. Press and hold down the
[
CALL
(
MENU
)]
key until “
SETUP MENUSETUP MENU
SETUP MENUSETUP MENU
SETUP MENU” appears.
2. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to se-
lect “
DSC SETUPDSC SETUP
DSC SETUPDSC SETUP
DSC SETUP” menu.
3. Press the
[
ENT
]
key, then select “
DSC BEEPDSC BEEP
DSC BEEPDSC BEEP
DSC BEEP”
with the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys.
4. Press the
[
ENT
]
key.
5. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to se-
lect “
POS REQUESTPOS REQUEST
POS REQUESTPOS REQUEST
POS REQUEST”.
6. Press the
[
ENT
]
key.
7. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to
select “
OFFOFF
OFFOFF
OFF”.
8. Press the
[
ENT
]
key to store the selected
setting.
9. To exit this menu and return to radio operation
mode press the
[
16/9
]
key.
If you wish to return to enabling the ringer tone, just repeat the above proce-
dure, pressing the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to select “
ONON
ONON
ON” in step “7” above.
11.8.2 Transmitting a Position Request to Another Vessel
Pre-Programmable Request
1. Press the
[
CALL
(
MENU
)]
key. The “
DSCDSC
DSCDSC
DSC
MENUMENU
MENUMENU
MENU” will appear in the display.
2. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to se-
lect “
POS REQUESTPOS REQUEST
POS REQUESTPOS REQUEST
POS REQUEST”.
3. Press
[
ENT
]
key to show the Position request di-
rectory. This directory uses the INDIVIDUAL Di-
rectory information.
4. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to se-
lect a name, then press the
[
ENT
]
key.
5. Press the
[
ENT
]
key to transmit the position
request DSC call.
6. When the GX1100S receives the position
from the polled vessel, the GX1100S will
produce a ringing alarm sound and the po-
sition from the polled vessel transferred to
the GPS Chart plotter.
7. Press any key to stop the alarm.