Operation Manual

GX1100SPage 44
6. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to scroll
through the first letter of the group name you want
to reference in the directory.
7. Press the
[
ENT
]
key to store the first letter in the
name and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete.
The name can consist of up to eleven characters,
if you do not use all eleven characters press the
[
ENT
]
key to move to the next space. This method
can also be used to enter a blank space in the
name. To clear the previous letter, press the
[
CLR
(
WX
)]
key.
9. After the eleventh letter or space has been entered, press and hold the
[
ENT
]
key to advance to the MMSI number (Maritime Mobile Service Iden-
tity Number) entry.
10. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to scroll through numbers, 0-9. To
enter the desired number and move one space to the right press the
[
ENT
]
key. Repeat this procedure until all nine space of the MMSI number are
entered.
11. If a mistake was made entering in the name or the MMSI number repeat
pressing the microphone’s
[
H/L
]
key until the wrong character is selected,
then press the
[
S
(
UP
)]
or
[
T
(
DOWN
)]
key to enter the correct letter or
number.
12. To store the data entered, press and hold the
[
ENT
]
key.
13. To enter another individual address, repeat steps
4 through 12.
14. To exit this menu and return to radio operation mode press the
[
16/9
]
key.
11.7.2 Transmitting a Group Call
Pre-Programmable Calling
1. Press the
[
CALL
(
MENU
)]
key. The “
DSCDSC
DSCDSC
DSC
MENUMENU
MENUMENU
MENU” will appear.
2. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to se-
lect “
GROUPGROUP
GROUPGROUP
GROUP”. (To cancel, press the
[
16/9
]
key or
[
CLR
]
key.)
3. Press the
[
ENT
]
key. The transceiver will
beep, and the “
Group DirectoryGroup Directory
Group DirectoryGroup Directory
Group Directory” will appear.
4. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to
select the “
GroupGroup
GroupGroup
Group” you want to contact.