Operation Manual

GX1100SPage 36
ber and move one space to the right press the
[
ENT
]
key. Repeat this proce-
dure until all nine spaces of the MMSI number are entered.
11. If a mistake was made entering in the name or the MMSI number, press the
microphone’s
[
H/L
]
key repeatedly until the wrong character is selected,
then press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to correct the entry.
12. To store the data entered, press and hold the
[
ENT
]
key.
13. To enter another individual address, repeat steps
4 through 12.
14. To exit this menu and return to radio operation mode press the
[
16/9
]
key.
11.5.2 Setting up Individual Reply
Allows setting up the radio to automatically (default setting) or manually re-
spond to a DSC Individual call requesting you to switch to a working channel for
voice communications. When Manual is selected the MMSI of the calling ves-
sel is shown allowing you to see who is calling. This function is similar to caller
id on a cellular phone.
1. Press and hold down the
[
CALL
(
MENU
)]
key until “
SETUP MENUSETUP MENU
SETUP MENUSETUP MENU
SETUP MENU” appears.
2. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to se-
lect “
DSC SETUPDSC SETUP
DSC SETUPDSC SETUP
DSC SETUP” menu.
3. Press the
[
ENT
]
key, then select “
INDIV RE-INDIV RE-
INDIV RE-INDIV RE-
INDIV RE-
PLYPLY
PLYPLY
PLY” with the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys.
4. Press the
[
ENT
]
key.
5. Turn the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to se-
lect “
AUTOAUTO
AUTOAUTO
AUTO” or “
MANUALMANUAL
MANUALMANUAL
MANUAL.”
6. Press the
[
ENT
]
key to store the selected
setting.
7. To exit this menu and return to radio operation
mode press the
[
16/9
]
key.