Operation Manual

GX1000SPage 52
13 MAINTENANCE
The inherent quality of the solid-state components used in this transceiver will
provide many years of continuous use. Taking the following precautions will
prevent damage to the transceiver.
• Never key the microphone unless an antenna or suitable dummy load is
connected to the transceiver.
• Ensure that the supply voltage to the transceiver does not exceed 16 VDC
or fall below 11 VDC.
• Use only STANDARD HORIZON-approved accessories and replacement
parts.
In the unlikely event of serious problems, please contact your Dealer or our
repair facility. Address and phone numbers for this facility, as well as warranty
information, are contained in section “15 WARRANTY.”
13.1 REPLACEMENT PARTS
Occasionally an owner needs a replacement mounting bracket or knob.
These can be ordered from our Parts Department by writing or calling:
Marine Division of Vertex Standard
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
Telephone [phone]
Commonly requested parts, and their part numbers are listed below.
• Power Cord: T9025406
• VOL/SQL Knob (Black): RA0977000
• VOL/SQL Knob (White): RA0973100
• Mounting Bracket (Black): RA0978400
• Mounting Bracket (White): RA0978300
• Mounting Bracket Knob (Black): RA0978600
• Mounting Bracket Knob (White): RA0978500
• Microphone Hanger (Black): RA0458800
• Microphone Hanger (White): RA0436000