Operation Manual

Page 49GX1000S
4. Press the
[
T
]
/
[
S
]
keys to select “
MSCANMSCAN
MSCANMSCAN
MSCAN (Memory Scan)”
or “
PSCANPSCAN
PSCANPSCAN
PSCAN (Priority Scan).”
5. Press the
[
CALL
(
SET
)
MENU
]
key to store the selected
setting.
6. Press the
[
16/9
]
key to exit the menu mode and return to
radio operation.
12.4 TIME OFFSET
This selection sets the time offset between local time and UTC (time GPS
sends to radio). Time is displayed when GPS position (LAT/LON) is displayed
by pressing and holding the
[
H/L
]
key. Default setting is “
00000000
00000000
0000.”
1. Press and hold down the
[
CALL
(
SET
)
MENU
]
key until
“
RADIO SETUPRADIO SETUP
RADIO SETUPRADIO SETUP
RADIO SETUP” menu appears.
2. Press the
[
CALL
(
SET
)
MENU
]
key, then select “
OFFSETOFFSET
OFFSETOFFSET
OFFSET
TIMETIME
TIMETIME
TIME” in the “
RADIO SETUPRADIO SETUP
RADIO SETUPRADIO SETUP
RADIO SETUP” menu with the
[
T
]
/
[
S
]
keys.
3. Press the
[
CALL
(
SET
)
MENU
]
key.
4. Press the
[
T
]
/
[
S
]
keys to select time offset from UTC.
See illustration below to find your offset time from UTC. If
“
0:000:00
0:000:00
0:00” is assigned, the time is the same as UTC (Univer-
sal Time Coordinated or GMT Greenwich Mean Time).
5. Press the
[
CALL
(
SET
)
MENU
]
key to store the time off-
set.
6. Press the
[
16/9
]
key to exit the menu mode and return to radio operation.
OFFSET TIME TABLE