Operation Manual
Page 39GX1000S
[
CALL
(
SET
)
MENU
]
key. Repeat this procedure until all nine space of the
MMSI number are entered. If a mistake was made enter-
ing the MMSI number, repeat pressing the
[
SCAN
(
MEM
)]
key until the wrong number is selected, then enter the
correct number.
11. To store the data entered, press and hold the
[
CALL
(
SET
)
MENU
]
key.
12. To enter another individual address, repeat steps 4 through 11.
13. Press the
[
16/9
]
key to exit the menu mode and return to radio operation.
11.5.2 Setting up Individual Reply
Allows setting up the radio to automatically (default setting) or manually re-
spond to a DSC Individual call requesting you to switch to a working channel
for voice communications. When Manual is selected the MMSI of the calling
vessel is shown allowing you to see who is calling. This function is similar to
caller id on a cellular phone.
1. Press and hold down the
[
CALL
(
SET
)
MENU
]
key
until “
RADIO SETUPRADIO SETUP
RADIO SETUPRADIO SETUP
RADIO SETUP” menu appears.
2. Press the
[
T
]
key to select “
DSC SETUPDSC SETUP
DSC SETUPDSC SETUP
DSC SETUP” menu.
3. Press the
[
CALL
(
SET
)
MENU
]
key, then select “
IN-IN-
IN-IN-
IN-
DIVIDUAL REPLYDIVIDUAL REPLY
DIVIDUAL REPLYDIVIDUAL REPLY
DIVIDUAL REPLY” with the
[
T
]
/
[
S
]
keys.
4. Press the
[
ENT
]
key.
5. Press the
[
T
]
/
[
S
]
keys to select “
AuAu
AuAu
Au (automatically)”
or “
oFoF
oFoF
oF (oFF).”
6. Press the
[
CALL
(
SET
)
MENU
]
key to store the se-
lected setting.
7. Press the
[
16/9
]
key to exit the menu mode and return to
radio operation.
11.5.3 Setting up the Individual Call Ringer
When an Individual Call is received the radio will produce a ringing tone for 2
minutes. This selection allows the Individual Call ringer time to be changed.
1. Press and hold down the
[
CALL
(
SET
)
MENU
]
key
until “
RADIO SETUPRADIO SETUP
RADIO SETUPRADIO SETUP
RADIO SETUP” menu appear.
2. Press the
[
T
]
key to select “
DSC SETUPDSC SETUP
DSC SETUPDSC SETUP
DSC SETUP” menu.
3. Press the
[
CALL
(
SET
)
MENU
]
key, then select
“
INDIVI RINGERINDIVI RINGER
INDIVI RINGERINDIVI RINGER
INDIVI RINGER” with the
[
T
]
/
[
S
]
keys.
4. Press the
[
CALL
(
SET
)
MENU
]
key.
5. Press the
[
T
]
/
[
S
]
keys to select ringing time of a Indi-
vidual Call.
3: 2 minutes