Operation Manual

Page 31GX1000S
10.11.4 Dual Watch
Dual watch is similar to priority scanning; however instead of multiple chan-
nels being selected into memory, only one channel is selected.
1. Select Priority scan mode, refer to section “10.11.1 Selecting the Scan
Type.”
2. By default the Priority Channel is set to Channel 16. If you what to select a
different channel the radio will Dual Watch to refer to “Priority Channel
Setting” on the previous page.
3. Select the channel you wish to Dual Watch along with
the priority channel.
4. Press and hold the
[
SCAN
(
MEM
)]
key until “MEM” is
shown on the display.
5. Press the
[
SCAN
(
MEM
)]
key and the radio will Dual Watch
between the selected priority channel and the channel
selected in step 3.
10.12 NAVIGATION INDICATION
The transceiver has the ability to display the time and the position (Latitude/
Longitude), when connected to a GPS receiver.
1. Press and hold the
[
H/L
]
key, displays the “Latitude” and
“Longitude” information alternately every two seconds. If
the GPS receiver is not receiving a fix, “
NO POSNO POS
NO POSNO POS
NO POS” notation
will appear on the display.
2. To hide the position information, press and hold the
[
H/L
]
key again.