Operation Manual

GX1000SPage 30
10.11.3 Priority Scanning
(
P-SCAN
)
The priority channel is set to channel 16 by the factory default. You may change
the priority channel to the desired channel. See box below.
1. Adjust the SQL knob until background noise disappears.
2. Select a desired channel to be scanned using the
[
T
]
/
[
S
]
keys. Press and
hold the
[
SCAN
(
MEM
)]
key for one second, “MEM” will
appear on the display which indicates the channel has
been programmed into the transceivers memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver’s memory, select the channel
then press and hold the
[
SCAN
(
MEM
)]
key until “MEM” is removed from
the display.
5. To start priority scanning, just press the
[
SCAN
(
MEM
)]
key momentarily. “
PSCANPSCAN
PSCANPSCAN
PSCAN” appears on the LCD. Scan-
ning will proceed between the memorized channels, and
the priority channel. The priority channel will be scanned
after each programmed channel.
6. To stop scanning, press the
[
16/9
]
or
[
WX
]
key.
Priority Channel Seting
1. Press and hold down the
[
CALL
(
SET
)
MENU
]
key
until “
RADIO SETUPRADIO SETUP
RADIO SETUPRADIO SETUP
RADIO SETUP” menu appears.
2. Press the
[
CALL
(
SET
)
MENU
]
key, then select
“
PRI-CHPRI-CH
PRI-CHPRI-CH
PRI-CH” in the “
RADIO SETUPRADIO SETUP
RADIO SETUPRADIO SETUP
RADIO SETUP” menu with the
[
T
]
/
[
S
]
keys.
3. Press the
[
CALL
(
SET
)
MENU
]
key.
4. Press the
[
T
]
/
[
S
]
keys to select the operating
mode (“
USAUSA
USAUSA
USA”, “
INTLINTL
INTLINTL
INTL”, or “
CANCAN
CANCAN
CAN”) which you wish to
change the Priority Channel.
5. Press the
[
CALL
(
SET
)
MENU
]
key.
6. Press the
[
T
]
/
[
S
]
keys to select the Priority chan-
nel.
7. Press the
[
CALL
(
SET
)
MENU
]
key to store the
selected setting.
8. Press the
[
16/9
]
key to exit the menu mode and return to radio
operation.