Manualshelf

Operation Manual

ManualsBrandsStandard Horizon ManualsMarineEclipse DSC - GX1000S
21222324252627282930
Page 29GX1000S
nels. However, in certain situations it may be necessary to temporarily use a
higher power. See page 16 (
[
H/L
]
key) for means to temporarily override the
low-power limit on these two channels.
10.11 SCANNING
Allows the user to select the scan type from Memory scan or Priority scan.
“Memory scan” scans the channels that were programmed into memory. “Pri-
ority scan” scans the channels programmed in memory with the priority chan-
nel (channel 16).
10.11.1 Selecting the Scan Type
1. Press and hold down the
[
CALL
(
SET
)
MENU
]
key until
“
RADIO SETUPRADIO SETUP
RADIO SETUPRADIO SETUP
RADIO SETUP” menu appears.
2. Press the
[
CALL
(
SET
)
MENU
]
key, then select “
SCANSCAN
SCANSCAN
SCAN” in
the “
RADIO SETUPRADIO SETUP
RADIO SETUPRADIO SETUP
RADIO SETUP” menu with the
[
T
]
/
[
S
]
keys.
3. Press the
[
CALL
(
SET
)
MENU
]
key.
4. Press the
[
T
]
/
[
S
]
keys to select “
PSCANPSCAN
PSCANPSCAN
PSCAN (Priority scan)”
or “
MSCANMSCAN
MSCANMSCAN
MSCAN (Memory scan).”
5. Press the
[
CALL
(
SET
)
MENU
]
key to store the selected
setting.
6. Press the
[
16/9
]
key to exit the menu mode and return to
radio operation.
10.11.2 Memory Scanning
(
M-SCAN
)
1. Adjust the SQL knob until background noise disappears.
2. Select a desired channel to be scanned using the
[
T
]
/
[
S
]
keys. Press and
hold the
[
SCAN
(
MEM
)]
key for one second, “MEM” will
appear on the LCD which indicates the channel has been
programmed into the transceivers memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver’s memory, select the channel
then press and hold the
[
SCAN
(
MEM
)]
key for one second, “MEM” will
disappear in the LCD.
5. To start scanning, just press the
[
SCAN
(
MEM
)]
key momentarily. “
MSCANMSCAN
MSCANMSCAN
MSCAN”
appears on the LCD. Scanning will proceed from the low-
est to the highest programmed channel number and will
stop on a channel when a transmission is received.
6. The channel number will blink during reception.
7. To stop scanning, press the
[
16/9
]
or
[
WX
]
key.