Manualshelf

Operation Manual

ManualsBrandsStandard Horizon ManualsMarineEclipse DSC - GX1000S
21222324252627282930
GX1000SPage 22
[
16/9
]
Key
Immediately recalls channel 16 from any channel location. Holding down
this key recalls channel 9. Pressing the
[
16/9
]
key again reverts to the
previous selected working channel.
Secondary use
Press and hold the
[
16/9
]
key then press the
[
WX
]
key to switch the Chan-
nel Group.
KEYPAD
[
S
]
/
[
T
]
Keys
The
[
S
]
and
[
T
]
keys are used to select a desired channel and to
select items in the DSC OPERATION and SETUP menus.
[
SCAN
(
MEM
)]
Key
Press this key to start and stop the scanning of programmed channels.
Refer to section “10.11 SCANNING” for details.
Secondary use
To program a channel into scan memory, select the channel and press
and hold the
[
SCAN
(
MEM
)]
key until “MEM” is shown on the display.
To delete a memorized channel from scan memory, select the channel
and press and hold the
[
SCAN
(
MEM
)]
key until “MEM” is removed
from the display.
[
CALL
(
SET
)
MENU
]
Key
Press the
[
CALL
(
SET
)
MENU
]
key to access the DSC OPERATION
menu. The “
INDIVIDUAL CALLINDIVIDUAL CALL
INDIVIDUAL CALLINDIVIDUAL CALL
INDIVIDUAL CALL,” “
ALL SHIPS CALLALL SHIPS CALL
ALL SHIPS CALLALL SHIPS CALL
ALL SHIPS CALL
(
URGENCY and
SAFETY
)
”, “
POS REQUESTPOS REQUEST
POS REQUESTPOS REQUEST
POS REQUEST,” “
POS REPORTPOS REPORT
POS REPORTPOS REPORT
POS REPORT,” and “
DSC TESTDSC TEST
DSC TESTDSC TEST
DSC TEST” functions
can be accessed from the DSC OPERATION menu.
NOTE: Before the DSC OPERATION menu can be selected an MMSI
must be entered. Refer to section “11.2 MARITIME MOBILE SER-
VICE IDENTITY
(
MMSI
)
.”
Secondary use
Press and hold the
[
CALL
(
SET
)
MENU
]
key to access the “
RADIORADIO
RADIORADIO
RADIO
SETUPSETUP
SETUPSETUP
SETUP” (refer to section “12 RADIO SETUP MODE”) or “
DSC SETUPDSC SETUP
DSC SETUPDSC SETUP
DSC SETUP”
menu (refer to section “11 DIGITAL SELECTIVE CALLING”).
[
DISTRESS
]
Key
Used to send a DSC Distress Call. To send the distress call refer to section
“11.3.1
(
Transmitting A DSC Distress Call
)
.”
DC INPUT CABLE
Connects the radio to a DC power supply capable of delivering 12V DC.