Operation Manual

Page 17GX1000S
8.4 CHECKING GPS CONNECTIONS
After connections have been made between the GX1000S and the GPS, a
small satellite icon ( ) will appear on the LCD display. To
see the additional GPS information, press and hold the
[
H/L
]
key. The GX1000S displays “LAT” and “LON” information al-
ternately every two seconds.
NOTE
If the GPS looses a fix or has a problem the Satellite icon ( ) will blink.
8.5 CHANGING THE GPS TIME
From the Factory the GX1000S shows GPS satellite time or UTC time. A time
offset is needed to show the local time in your area.
1. Press and hold down the
[
CALL
(
SET
)
MENU
]
key until
“
RADIO SETUPRADIO SETUP
RADIO SETUPRADIO SETUP
RADIO SETUP” menu appears.
2. Press the
[
CALL
(
SET
)
MENU
]
key, then select “
OFFSETOFFSET
OFFSETOFFSET
OFFSET
TIMETIME
TIMETIME
TIME” with the
[
T
]
/
[
S
]
keys.
3. Press the
[
CALL
(
SET
)
MENU
]
key.
4. Press the
[
T
]
/
[
S
]
keys to select time offset from UTC.
See illustration below to find your offset time from UTC. If
“
0:000:00
0:000:00
0:00” is assigned, the time is the same as UTC (Univer-
sal Time Coordinated or GMT Greenwich Mean Time).
5. Press the
[
CALL
(
SET
)
MENU
]
key to store the time offset.
6. Press the
[
16/9
]
key to exit the menu mode and return to
radio operation.
OFFSET TIME TABLE