Operation Manual

GX1000SPage 16
8.3 ACCESSORY CABLE
Wire Color/Description
WHITE - External Speaker
(
+
)
SHIELD - External Speaker
(–)
BLUE- NMEA Input
(
+
)
GREEN - NMEA ground
(–)
PURPLE- NMEA Output
(
+
)
Connection Examples
Connect to 4 Ohm external speaker
Connect to 4 Ohm external speaker
Connect to NMEA
(+)
output of GPS
Connect to NMEA
(–)
ground of GPS
Connect to NMEA
(
+
)
input of GPS
When connecting the external speaker or GPS navigation receiver, strip off
about 1 inch (2.5 cm) of the specified wire’s insulation, then splice the ends
together using proper waterproofing techniques.
• The GPS must have the NMEA Output turned on and set to 4800 Baud in
the setup menu. If there is a selection for parity select none.
• For further information on interfacing /setting up your GPS. Please contact
the manufacturer of the GPS receiver.
• GX1000S can read NMEA-0183 version 2.0 or higher.
• The NMEA supported sentences are:
Input: GLL, GGA, RMC and GNS (RMC sentence is recommended)
Output:DSC and DSE
(DSC sentences to Standard Horizon Plotter for Position Polling)
If you have further inquires, please feel free to contact Product Support at:
Phone: [phone]
Email: [e-mail]
GPS Receiver
External Speaker
Radio Wire
Plotter Connections
Green
Purple NMEA IN
NMEA COMMON
NMEA OUT
( )
( )
Blue
Shield
White