Operation Manual

CP190i and CPF190i Page 95
APA Off Off On
APB Off Off On
HDG Off Off Off
BOD Off Off On
XTE On On On
RMA Off Off Off
RMB Off Off Off
RMC On On On
GGA On On On
HSC Off Off Off
DBT On Off Off
DPT On Off Off
MTW On Off Off
VHW On Off Off
GSA On Off Off
GSV On Off Off
CPF190i
Sentence Port1 Port2
GLL On On
VTG Off Off
BWC Off Off
WCV Off Off
APA Off On
APB Off On
HDG Off Off
BOD Off On
XTE On On
RMA Off Off
RMB Off Off
RMC On On
GGA On On
HSC Off Off
DBT On Off
DPT On Off
MTW On Off
VHW On Off
GSA On Off
GSV On Off
13.1 NAVIGATE
The Navigate Menu allows customization of the Coordinate System (Loran TD's), Chart
Datum, Chart Orientation Resolution (angle the vessel has to change before the chart is
redrawn) and Static Navigation. See the following table
Coordinate System : Selections are:
a. TD: Time Difference, based on Loran (see the following Par. 13.1.0)
b. UTM: Universal Transverse Mercator Grid
c. ddd mm.mmm:Degrees Minutes and Thousands of Minutes
d. ddd mm.mm: Degrees Minutes and Hundredths of Minutes
e. ddd mm.ss: Degrees Minutes and Seconds (default)
Chart Datum : Allows selection of Chart Datums. The default Datum is WGS84 as C-MAP B
Y JEPPESEN
cartography has been compiled using the WGS84 Datum. A datum is a mathematical