Operation Manual

CP190i and CPF190i Page 91
Figure 12.7a - NMEA Data page
4. Press [ENT] to freeze the data on the display so it is easy to read and understand.
5. Press [ENT] again to receive data again.
6. View data from a device connected to another data port, press the [ZOOM IN].
12.8 NMEA TREND PAGES
The CP190i* and CPF190i have the following NMEA Trend pages.
Trends will be shown for Depth, Temp and Speed (DST521 or DST526 must be connected
to show speed through the water) when a STANDARD HORIZON transducer is connected.
To show Wind trend information the CP190i and CPF190i must be connected to the NMEA
Output of a external Wind instrument.
NOTE*
The CP190i must be connected to the Optional FF525 50/200kHz Black Box Fish Finder.
To select a NMEA Trend Page:
1. Press [MENU], move the ShuttlePoint knob to highlight
NMEA DISPLAY and press
[ENT].
Figure 12.8 - NMEA Display menu
2. Move the ShuttlePoint knob to select DEPTH TREND, WIND SPEED TREND, TEMP
TREND or SOG TREND and press [ENT].