Operation Manual

CP190i and CPF190i Page 83
mooring, downloading and uploading of ships, generally sheltered from waves and winds.
Port installations are piers, wharves, pontoons, dry docks, cranes....
Tracks & Routes : Turns the Tracks and Routes On or Off (recommended and established routes for ships at
sea, including traffic separation schemes, deep water routes).
12.0.8 Depth Settings
Controls the depth information on the Chart page.
Depth Range Min : Sets the minimum depth limit to show Depth Sounding, Bathymetric Lines and Depth Areas.
Depth Range Max : Sets the max depth limit to show Depth Sounding, Bathymetric Lines and Depth Areas.
Figure 12.0.8 - Depth Settings
12.0.9 Land Settings
Controls the display on the map of the terrestrial features.
Land Elevations : Turns the Land Elevations On or Off.
Land Elevation Values : Turns the Land Elevation Values On or Off.
Roads : Turns the Roads On or Off.
Points Of Interest : Turns the Points of Information On or Off.
Figure 12.0.9 - Example of Roads and Points Of Interest
12.0.10 Chart Settings
Settings that control how the chart features will be shown on the Chart page of the GPS
Chart Plotter.