Operation Manual

Page 82 CP190i and CPF190i
The table below shows the selections for each mode:
Setting Full Medium Low Radar Tides Custom
(Default values)
Place Names On On On On On On
Name Tags On Off Off Off Off Off
Nav Aids & Light Sectors On No Sectors No Sectors No Sectors Off On
Attention Areas On On Off Off Off Off
Tides & Currents On Off Off Off On On
Seabed Type On Off Off Off Off On
Ports & Services On On Off On Off On
Tracks & Routes On Off Off Off Off On
Depth Range Min 0Ft 0Ft 0Ft 0Ft 0Ft 0 Ft
Depth Range Max 32804Ft 32804Ft 32804Ft 32804Ft 32804Ft 32804Ft
Land Elevations On On Off Off Off Off
Land Elevation Values On Off Off Off Off On
Roads On Off Off Off Off On
Points Of Interest On Off Off Off Off On
Lat/Lon Grid On Off Off Off Off Off
Chart Boundaries On Auto Off Off Off On
Value Added Data On Off Off Off On On
Chart Lock On On On On On On
Mixing Levels On On On On On On
Underwater Ob. Limit 1000Ft 32Ft 32Ft 32Ft 32Ft 1000Ft
Rocks Icon + Depth Icon Icon Icon Icon Icon
Obstructions Icon + Depth Icon Icon Icon Icon Icon
Diffusers Icon + Depth Icon Icon Icon Icon Icon
Wrecks Icon + Depth Icon Icon Icon Icon Icon
12.0.7 Marine Settings
Controls the display on the chart of the marine features.
Place Names : Turns the local area names On or Off.
Name Tags : Turns a tag for particular chart objects that either includes the Name of the chart object or
the Depth of an Underwater chart object On or Off.
Nav Aids & Light Sectors: Turns the presentation of Lights, Signals, Buoys and Beacons On (Nav-Aids & Light
Sectors are shown), Off (Nav-Aids & Light Sectors are not shown) or No Sector (Nav-Aids
are shown, Light Sectors are hidden).
Attention Areas : Turns the Attention Areas (areas in which special attention by the mariner is required
because of natural or man-made hazards sailing regulations and restrictions) On or Off.
Tides & Currents : Turns the Tides and Currents On or Off.
When data/time is available, Tidal stream arrows are shown on the charts, indicating the
direction and strength of the Tide. If no data/time is available from the GPS or the GPS
Chart Plotter is not in Simulation mode, the icon on the chart is generic one. The color of
the arrow denotes the strength of the current as follows:
When the GPS Chart Plotter receives a valid position fix, the Tide icons are shown on
the charts on the basis of the current date and time: the screen displays and changes
arrows as date/time changes.
Seabed Type : Turns the Seabed Type On or Off.
Ports & Services : Turns the Ports and Service icons On of Off. Areas along the shore with facilities for