Operation Manual

CP190i and CPF190i Page 79

12.0.2 Window Selections

The default is the Two Line Small window. The CP190i and CPF190i windows may be

changed by the procedure below.

Figure 12.0.2 - Data window layout

1. To change, press [MENU], move the ShuttlePoint knob to highlight SETUP MENU and

press [ENT].

2. Move the ShuttlePoint knob to highlight

GENERAL SETUP and press [ENT] or move

the ShuttlePoint knob to the right.

3. Move the ShuttlePoint knob to highlight

WINDOWS SETUP and press [ENT] or move

the ShuttlePoint knob to the right.

4. Move the ShuttlePoint knob to highlight

CHART PAGE and press [ENT] or move the

ShuttlePoint knob to the right.

5. Select the desired window,

HIGHWAY or COMPASS, and press [ENT] or move the

ShuttlePoint knob to the right.

6. Press [CLR] or move the ShuttlePoint knob to exit the menu and show the Chart page.

12.0.3 Customizing the Data Windows

The data fields contained on the General, 1 Line Small/Large and 2 Line Small data windows

can be changed to the following selections:

· MAX SPD = Max Speed

· SOG = Speed Over Ground

· COG = Course Over Ground

· DST = Distance to Destination

· BRG = Bearing to Destination

· XTE = Cross Track Error

· TTG = Time To Go

· STR = Steering

· HDG = Heading from Electronic Compass

· DTP = Depth

· SPD = Speed

· ALT = Altitude

· AWS = Apparent Wind Speed

· AWD = Apparent Wind Direction

· TWS = True Wind Speed

· TWD = True Wind Direction