Operation Manual

Page 78 CP190i and CPF190i
2. Move the ShuttlePoint knob to highlight Single or Dual and press [ENT].
Figure 12.0 - Chart selection menu
NOTE
may appear on the unused window of the Dual Chart page. It happens when the GPS Chart
Plotter updates the displayed chart in the not active window. So the user understands that the GPS
Chart Plotter is busy.
12.0.0 Change Focus on Dual Chart page
When Dual Chart is selected, you will notice one of the chart windows will have a red border
around it. This red border indicates which chart window the chart plotter has the focus on,
meaning if the ShuttlePoint knob is moved the cursor on chart window will move. The focus
may be changed to the other chart window with the procedure below:
1. Press and hold [FIND] for 2 seconds. The red border around the window is moved from
active window to the other.
Repeat the step 1. to move the focus from a window to another.
12.0.1 Single Chart page
Figure 12.0.1 - Example of single Chart page