Operation Manual

CP190i and CPF190i Page 73
Figure 10.0 - Tracking
10.0.0 Saving and starting a new Track
A Track is automatically saved and retained in memory when the power is turned off. To start
a new Track:
1. Press [MENU], move the ShuttlePoint knob to highlight
USER POINTS and press
[ENT].
2. Move the ShuttlePoint knob to highlight
TRACK and press [ENT].
3. Move the ShuttlePoint knob to highlight
ACTIVE TRACK and press [ENT] or move the
ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob up/down to select the next available open Track and press
[ENT] or move the ShuttlePoint knob to the right.
5. Move the ShuttlePoint knob to highlight
TRACKING and press [ENT] or move the
ShuttlePoint knob to the right to set On.
6. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown.
7. A new Track now will be laid down.
10.0.1 Deleting a Track
To delete a Track:
1. Press [MENU], move the ShuttlePoint knob to highlight
USER POINTS and press
[ENT].
2. Move the ShuttlePoint knob to highlight
TRACK and press [ENT].
3. Move the ShuttlePoint knob to highlight
DELETE and press [ENT] or move the
ShuttlePoint knob to the right.
4. A warning popup window will be shown to confirm if you want to reset the Track. Move
the ShuttlePoint knob to highlight
YES and press [ENT] or move the ShuttlePoint knob
to the right. The Track is now deleted.
5. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown.
10.0.2 Other settings
You will notice the Track menu has other selections:
TRACKING Allows turning on or off the tracking function
ACTIVE TRACK Allows saving a Track to one of the 20 Tracks available
VISIBLE Shows or hides a Track shown in ACTIVE TRACK menu
LINE COLOR Selects the color of the Track line
DELETE Deletes a Track selected in the ACTIVE TRACK menu