Operation Manual

Page 66 CP190i and CPF190i
9.1 CHANGING THE NAME OF A ROUTE
To name the Route:
1. Press [MENU], move the ShuttlePoint knob to highlight
USER POINTS and press
[ENT].
2. Move the ShuttlePoint knob to highlight
ROUTE and press [ENT].
3. Move the ShuttlePoint knob to highlight
EDIT and press [ENT] or move the ShuttlePoint
knob to the right.
4. Move the ShuttlePoint knob to highlight
NAME and press [ENT]. A popup window will
be shown.
5. Move the ShuttlePoint knob up/down to change the characters and left/right to select
a different character in the Route’s Name.
Figure 9.1 - Edit Route (Route Report)
6. When finished press [ENT] to save.
7. Press [CLR] to show the Chart page.
9.2 CREATING AN OLYMPIC ROUTE
This feature allows the starting point in a Route to be saved as the final destination point.
1. On the Chart page move the ShuttlePoint knob to the Lat/Lon of the Starting Waypoint
in the Route.
2. Press [ROUTE], the Starting Waypoint will be placed under the cursor.
3. Move the ShuttlePoint knob to the second Lat/Lon of the next leg in the Route.
4. Press [ROUTE]. Another Waypoint is shown under the cursor and a line joins the
Starting Waypoint to the Second Waypoint.
5. Repeat steps 3 and 4 until all Waypoints are entered into the Route.
Figure 9.2 - Olympic Route creation (1)