Operation Manual

Page 64 CP190i and CPF190i
8. MAN OVER BOARD (MOB) FUNCTION
During navigation, the “MOB” feature provides a one-touch method of storing a location,
such as a point were a crew member fell overboard. In this mode, the CP190i or CPF190i
places a MOB point on the Chart page and all the navigation data shown is related to
navigating back to this point, allowing you to retrace your path to the MOB point efficiently.
8.0 PLACING A MOB POINT
1. On the Chart page, press [MOB] to start navigating back to the point.
2. You will notice a MOB Mark will be on the Chart page and all navigation is referring back
to this point.
3. To stop navigating to the MOB point, press [GOTO], select
STOP and press [ENT].
Figure 8.0 - MOB point
8.1 DELETING A MOB POINT
1. Move the ShuttlePoint knob until the cursor is over the top of the MOB icon.
2. Press [ENT], move the ShuttlePoint knob to highlight
DELETE and press [ENT]: a
popup window will be shown to confirm deleting the MOB point.
3. Move the ShuttlePoint knob to highlight
YES and press [ENT].
Figure 8.1 - Deleting MOB point