Operation Manual

Page 62 CP190i and CPF190i
7.4 GOTO CURSOR, ROUTE AND MARK
The CP190i and CPF190i can easily be set to start navigating to the cursor on the Chart
page, a saved Mark or a Route that was created.
GOTO CURSOR
1. Move the ShuttlePoint knob to the exact position you want to navigate to.
2. Press [GOTO] and a GOTO popup window will be shown.
Figure 7.4 - GOTO menu (1)
3. Move the ShuttlePoint knob to highlight CURSOR and press [ENT].
Figure 7.4a - GOTO menu (2)
4. The GPS Chart Plotter is now navigating from your current position to the location
selected at step 1. A bearing line between the vessels location and the destination point
is shown. A popup window shows the Distance (DST) and Bearing (BRG) from the
vessels location to the destination point.
Figure 7.4b - GOTO menu (3)