Operation Manual

Page 60 CP190i and CPF190i
Figure 7.1.1 - Moving Mark or Waypoint (1)
4. Press [ENT] ([CLR] to abort the move), the Waypoint appears in the new position.
Figure 7.1.1a - Moving Mark or Waypoint (2)
7.2 MARKS/WAYPOINTS LIST
The MARKS/WPTS List shows all the Marks and Waypoints that have been stored into the
GPS Chart Plotter. This page also allows you to:
ICON Sorts by icon type. Selections are:
a. SELECT : only User Points with the selected icon are shown
b. ALL : all User Points are shown
FIND Searches through the Marks or Waypoints to find a point by name using the ShuttlePoint knob.
LOCATE Shows the position of a Mark or Waypoint on the Chart page.
EDIT Edits a previous stored Mark or Waypoint.
SORT Sorts the name of User Points. Selections are:
a. A-Z ASCENDING : sorts the name of the Mark or Waypoint in ascending order
b. Z-A DESCENDING : sorts the name of the Mark or Waypoint in descending order
NEW MARK Enters in Marks, editing icon type and position.
MODE Controls how the Marks or Waypoints are shown on the Chart page. Selections are:
a. SHOW : icon and name are shown
b. ICON : only icon (no name) is shown
c. HIDE : Mark or Waypoint is hidden
d. SHOW ALL : all Marks or Waypoints are shown
e. ICON ALL : all icons are shown without name
f. HIDE ALL : all Marks or Waypoints are hidden
DELETE Opens a window with two options:
a. DELETE SELECTED : deletes the selected point
b. DELETE ALL : deletes all stored points
SEND* Sends the stored points to a external device (PC) capable of listening to NMEA WPL and RTE sentences.
RECEIVE* Receives points from an external device (PC) that is capable of sending NMEA WPL sentence.