Operation Manual

CP190i and CPF190i Page 59
Figure 7.1 - Mark editing
2. The Mark Icon is selected, press [ENT]. A popup window appears:
Figure 7.1a - Mark Icons
3. Move the ShuttlePoint knob to select the desired Mark Icon, when finished press [ENT].
4. Move the ShuttlePoint knob to the right to select the Mark Name. Press [ENT] and the
first digit in the name will be highlighted.
5. Move the ShuttlePoint knob up or down to select the first character.
6. Move the ShuttlePoint knob to the right to select the next character.
7. Repeat steps 4 and 5 until the Mark name is shown. Press [ENT].
8. Move the ShuttlePoint knob to the right to select the Lat/Lon and press [ENT].
9. Move the ShuttlePoint knob up or down to select the first character.
10. Move the ShuttlePoint knob to the right to select the next character.
11. Repeat steps 9 and 10 until the desired position is shown. Press [ENT] and [CLR] to
store the Mark.
7.1.0 Deleting a Mark or Waypoint
1. Move the ShuttlePoint knob over the Mark or Waypoint to delete.
2. Press [ENT], move the ShuttlePoint knob to highlight
DELETE and press [ENT]. A
popup window will be shown to confirm deleting the point.
3. Move the ShuttlePoint knob to highlight
YES and press [ENT].
7.1.1 Moving a Mark or Waypoint
1. Move the ShuttlePoint knob over the Mark or Waypoint you want to move.
2. Press [ENT], move the ShuttlePoint knob to highlight
MOVE and press [ENT].
3. Use the ShuttlePoint knob to move the cursor. A dotted line, connecting the previous
Waypoint position to the new position, is shown: