Operation Manual

CP190i and CPF190i Page 51

Note that in the top of the previous picture the chart scale remains the same but it is

graphically compressed.

By pressing [ZOOM IN]/[ZOOM OUT] a popup window is displayed on a corner of the chart

screen. The window shows the current zoom factor: Normal is the original chart level (1:1

scale), Over-Zoom x2, x4, x16, x32, Under-Zoom x1/2, x1/4.

To activate this function follow the procedure:

1. Press [MENU], move the ShuttlePoint knob to highlight

SETUP MENU and press

[ENT].

2. Move the ShuttlePoint knob to highlight

MAX FUNCTIONS and press [ENT] or move

the ShuttlePoint knob to the right.

3. Move the ShuttlePoint knob to highlight

ZOOM TYPE and press [ENT] or move the

ShuttlePoint knob to the right.

4. The menu now shows two selections,

STANDARD or FLEXI-ZOOM.

5. Move the ShuttlePoint knob to select the selection and press [ENT].

6. Press [CLR] until the menu disappears or an easier method is to move the ShuttlePoint

knob to the left a few times.

6.0.1 Icon Size

On MAX charts it is possible to set the size of all icons drawn on the charts, selecting

between Standard (default) and Large size.

Figure 6.0.1 - Icons Size