Operation Manual

Page 40 CP190i and CPF190i
4. Move the ShuttlePoint knob to highlight the desired Tide Station and press [ENT].
5. Another window will be shown detailing the selected Tide Station information.
6. Press [CLR] to show the actual position of the Tide Station on the Chart page.
7. Press [CLR] again at any time to return your cursor to your vessel’s position.
Figure 4.0.2 - Find Tide Stations
Figure 4.0.2a - Tide Graph page
Refer to the image above. The time (3) displayed corresponds to the location of the cross-
hair cursor (2) in the Tide Graph (1). Moving the ShuttlePoint knob to the left or right changes
the time, and moving the ShuttlePoint knob up or down selects the Tide height and Tide
draught on the Tide Graph.
NOTE
The Local Offset matches the Time Offset entered in the Time Setup menu (see Par. 3.2)
4.0.3 Wrecks
This feature is used to locate the 20 nearest Wrecks to the position of your vessel. A Wreck
is represented with an icon on the chart. See the following table:
Figure 4.0.3 - Wreck icons Table