Operation Manual

Page 36 CP190i and CPF190i
CURSOR WINDOW By default when the cursor is moved a window is shown with the Lat/Lon Distance and
Bearing from the vessels location to the cursor. This selection allows the window to be
turned On (default) or Off. The Cursor Window is automatically disabled when General
is set in Windows Setup option.
CURSOR POSITION The position of the cursor can be customized so it is centered in the middle (if Center
selected) or centered on the bottom of the Chart page (if Bottom selected, default).
COG TIME LINE It is a line projected from the ship icon which indicates the distance your vessel will travel
at the current speed. Selections are 2, 10 (default), 30 minutes, 1, 2 hours and infinite.
COMPASS ROSE Allows selection of compass direction indication around ship icon. The default is On.
BUILT-IN CHARTS Enables (On) or disables (Off) the Built-In Charts. The default is On.
3.7 ABOUT PAGE
From Main Menu page it is possible to select the About page containing Software, Chart and
optional devices information.
1. Press [MENU], move the ShuttlePoint knob to highlight
SETUP MENU and press
[ENT].
2. Move the ShuttlePoint knob to highlight
About... and press [ENT] or move the
ShuttlePoint knob to the right.
3. The information page appears on the screen (see the following picture).