Operation Manual

Page 132 CP190i and CPF190i
20.4 OPTIONAL WAAS GPS RECEIVER SPECIFICATIONS
This optional WAAS GPS Receiver is based on a ultimate GPS engine that delivers
accuracy better than three meters by decoding the GPS correction signals from the satellite-
based WAAS (Wide Area Augmentation System). The GPS engine, interface electronics
and the passive antenna are enclosed inside the waterproof plastic housing. This provides
advanced state of the art GPS performance in an easy to use package.
Physical Characteristics
Color Ivory white
Dimensions 97mm in diameter x 32mm in height (flush mounted) or 61,5mm on flag-pole mount
Weight (without cable) 0,35 lb (160 g)
Cable white 15 meter 8x28AWG cable with 6 pins female connector
Electrical Characteristics
Input Voltage 10 Vdc to 35 Vdc unregulated
Input Current 0.8 Wmax
GPS Receiver Sensitivity Tracking, Navigation :-160 dBm
Acquisition, Reacquisition :-160 dBm
Cold Starts :-145 dBm
GPS Performance
GNSS Systems GPS : L1 C/A
GALILEO : L1
SBAS : WAAS (North America), EGNOS (Europe), MSAS (Asia),
GAGAN (Indian)
Geodetic Datum WGS84
Channels 32 + 18
Acquisition Time
Reacquisition < 1 second
Hot Start 1 second
Warm Start 29 seconds
Cold Start 29 seconds
Accuracy
GPS < 10 Ft
with SBAS < 2.0m
NMEA Output
Messages GGA, RMC, GSA, GSV, TXT