Operation Manual

Page 130 CP190i and CPF190i
20. SPECIFICATIONS
20.0 CP190i/CPF190i SPECIFICATIONS
Power Consumption Max Backlight : CP190i = 0.5A@12VDC
: CPF190i = 1.3A@12VDC
Power supply : 10-35 Volt DC
Interface : Input/Output Interface NMEA-0183
Display : TFT Color LCD
(active area 5") sunviewable technology
Display Resolution : 320 x 232 pixels
Cartography : C-MAP B
Y JEPPESEN NT
+
/MAX C-CARD
Operating Temperature range : 32°F/+131°F (0°C/+55°C)
Storage Temperature : -4°F/+158°F (-20°C/+70°C)
Water Resistance : splash-proof
Memory : Permanent
Keyboard : Silicon rubber, backlight
Weight (without bracket) : 1,655 lb (750 g)
User Points (Marks/Waypoints) : 3000
Routes : 50 (max 100 Waypoints each)
Track Points : 10000 (recordable in 20 Tracks)
NMEA Output sentences : GLL, VTG, BWC, WCV, APA, APB, HTG, BOD,
XTE, RMA, RMB, RMC, GGA, HSC, DBT, DPT,
MTW, VHW, WPL, RTE, GSA, GSV
NMEA Input sentences : BWC, DSC, DSE, GGA, GLL, GSA, GSV, HDG,
HDM, HDT, RMC, VHW, VTG, DPT, DBT, MTW,
VWR, VWT, TLL, WPL, RTE
20.1 CPF190i FISH FINDER SPECIFICATIONS
Power Output : 600W
Frequency : 50 and 200kHz
Minimum Depth : 5Ft at 50kHz, 2.5Ft at 200kHz
Maximum Depth : 1500Ft at 50kHz, 700Ft at 200kHz
Airmar X-DUCER ID : Must use STANDARD HORIZON transducers
Advanced Digital Signal Processing
Speed & Temperature Sensor (if available on transducer)
Alarms (Shallow Water, depth, Fish, temp)
Trip Log, Fish Symbols
STC, Interference Rejection, Automatic noise reduction
A-Scope, White Line, Zoom x2/x4
Auto range/gain/frequency/shift/ping rate
16/256 colors display user selectable