Operation Manual

CP190i and CPF190i Page 125
17.13.2 Fish
The Fish Alarm can be set to detect and alert you depending on the size of fish. The options
are: Off, Small, Medium, Big and Huge. The alarm sounds if the set size (or bigger) is
detected.
17.13.3 Temperature Upper
Triggers an alarm when the transducer reports a temperature above the set temperature.
17.13.4 Temperature Lower
Triggers an alarm when the transducer reports a temperature below the set temperature.
17.13.5 Temperature Rate
Triggers an alarm when the transducer reports a temperature variation rate above the set
temperature.
17.14 SAVE SETTINGS TO USER C-CARD
This option saves the complete set of Fish Finder settings to an optional User C-CARD. This
is useful to avoid the user having to retune up Fish Finder after a RAM Clear operation or
a software update.
Figure 17.14 - C-CARD - Save settings
17.15 LOAD SETTINGS FROM USER C-CARD
This option loads the complete set of Fish Finder settings from the User C-CARD (Memory
Card that may be used to backup the User Points and Tracks too).