Operation Manual

Page 116 CP190i and CPF190i
Figure 17.2.2 - Zoom Full page
17.2.3 200 kHz and 50 kHz Fish/Chart Pages
Selects the GPS Chart Plotter display to show the Chart on the left half of the screen and
the Fish Finder on the right half of the screen. 200kHz or 50 kHz Fish Finder can be selected
on the right half of the display.
Figure 17.2.3 - Fish/Chart page
When the Fish/Chart page has been selected please follow the procedure below to place
the focus on the Chart page or on the Fish Finder window:
1. Press and hold [FIND] for 2 seconds: a popup window appears wheare the active focus
window label is highlighted.
2. Move the ShuttlePoint knob up and down and press [ENT]. The focus is changed.
With the focus on the Chart page the cursor may be moved and all chart menus can be
selected. When focus is on the Fish Finder window the Variable Range Marker can be
moved to see the depths of targets and Fish Finder menus can be accessed.
17.3 SETUP MENU
This section explains how to show the Fish Finder Setup Menu and describe the Fish Finder
Setup Menu sub-options.
1. From the Full Fish Finder page, press [MENU]. The following menu appears: