Operation Manual

Page 78 CP590
Figure 12.0.3 - Customizing the Data Windows
NOTE
Data window fields on the NAVIGATION, HIGHWAY, GPS STATUS, and NMEA pages may be
customized in the above manner.
12.0.4 Additional Functions on Chart Page: Information on Objects
When on the Chart page, you will notice icons of Buoys, Towers, Lights, Wrecks, Tide
Stations, Ports icons, etc.. If the cursor is moved over the top of these icons a popup window
will be shown with information about the icon (this is possible only if the Auto Info function
is enabled). The CP590 allows you to see information On All cartographic objects shown
on the screen, or only On Points or to turn this function off (in this case no popup window
is shown when the cursor is placed on a cartographic object). The default setting is On
Points.
Figure 12.0.4 - Example of Auto Info settings
To select the information displayed on objects follow the procedure:
1. Press [MENU], move the ShuttlePoint knob to highlight
SETUP MENU and press
[ENT].
2. Move the ShuttlePoint knob to highlight
GENERAL SETUP and press [ENT].
3. Move the ShuttlePoint knob to highlight
AUTO INFO and press [ENT].
4. Move the ShuttlePoint knob up or down to highlight
OFF, ON POINTS or ON ALL and
press [ENT] or move the ShuttlePoint knob to the right.
5. Press [CLR] or move the ShuttlePoint knob to the left until the menu disappears.