Operation Manual

CP590 Page 77

12.0.3 Customizing Data Windows

The data fields contained on the General, 1 line small/large and 2 line small data windows

can be changed to the following selections:

· SOG = Speed Over Ground

· MAX SPEED = Max Speed

· COG = Course Over Ground

· DST = Distance to Destination

· BRG = Bearing to Destination

· XTE = Cross Track Error

· TTG = Time To Go

· STR = Steering Angle

· HDG = Heading from Electronic Compass

· DPT = Depth

· SPD = Speed Through Water

· ALT = Altitude

· AWS = Apparent Wind Speed

· AWD = Apparent Wind Direction

· TWS = True Wind Speed

· TWD = True Wind Direction

· HDOP = Horizontal Dilution of Precision

· VDOP = Vertical Dilution of Precision

· TEMP = Water Temperature

· TLOG = Trip Log

· DATE = Current Date

· TIME = Current Time

· VMG = Velocity Made Good

· ETA = Estimated Time of Arrival

· TRACKING = Available free Track point

· SCALE = Chart Scale

· GPS STATUS = Shows GPS fix status (WAAS, 3D, 2D, ...)

NOTE

When the GENERAL window is selected and the CP590 is in Home Mode, the BRG will show - -

-, unless the CP590 is navigating to a point. When in Cursor Mode, the BRG shows the Bearing

from the ship’s position to the cursor location.

NOTE

See Par. 10.1.0 if Trip Log is selected in one of the Data Windows and you want to reset the log.

NOTE

Chart Scale is always displayed in General chart window.

NOTE

GPS Status is always displayed in General and 1 line large chart windows.

To select the desired field, follow the procedure:

1. Press and hold [MENU] until a field is highlighted (it will be shown in a yellow frame).

2. Move the ShuttlePoint knob to the desired data field (the yellow frame is moved to the

desired data field) and press [ENT]. The popup window will be shown.

3. Move the ShuttlePoint knob up/down or left/right to choose the desired setting and press [ENT].

4. Press [CLR] to store and exit the editing mode.