Operation Manual

Page 76 CP590
12.0.1 Single Chart Page
Figure 12.0.1 - Example of single Chart page
12.0.2 Window Selections
The CP590 windows, displayed on Chart page, may be changed in the following way.The
default is the 2 lines small window.
1. To change, press [MENU], move the ShuttlePoint knob to highlight
SETUP MENU and
press [ENT].
2. Move the ShuttlePoint knob to highlight
GENERAL SETUP and press [ENT].
3. Move the ShuttlePoint knob to highlight
WINDOW SETUP and press [ENT].
4. Move the ShuttlePoint knob to highlight
CHART PAGE and press [ENT].
5. Select the desired windows configuration (
None, General, 1 line small, 1 line large,
2 lines small, Highway or Compass) and press [ENT].
6. Press [CLR] or move the ShuttlePoint knob to exit the menu and show the Chart page.
Figure 12.0.2 - Data window layout