Operation Manual

Page 56 CP590
Figure 7.1.1 - Moving Mark or Waypoint (I)
4. Press [ENT] ([CLR] to abort the move), the Waypoint appears in the new position.
Figure 7.1.1a - Moving Mark or Waypoint (II)
7.2 MARKS/WAYPOINTS LIST
The MARKS/WPTS List shows all the Marks and Waypoints that have been stored into the
CP590. To obtain the List page:
1. Created a Mark.
2. Place the cursor over the Mark, press [L
IST].
This page also allows you to:
ICON Sorts by icon type. Selections are:
a. SELECT : only User Points with the selected icon are shown
b. ALL : all User Points are shown
FIND Searches through the Marks or Waypoints to find a point by name using the ShuttlePoint knob.
LOCATE Shows the position of a Mark or Waypoint on the Chart page.
EDIT Edits a previous stored Mark or Waypoint.
NEW MARK Enters in Marks, editing icon type and position.
MODE Controls how the Marks or Waypoints are shown on the Chart page. Selections are:
a. SHOW : icon and name are shown
b. ICON : only icon (no name) is shown
c. HIDE : Mark or Waypoint is hidden
d. SHOW ALL : all Marks or Waypoints are shown
e. ICON ALL : all icons are shown without name
f. HIDE ALL : all Marks or Waypoints are hidden
DELETE Deletes the selected point.
DEL ALL Deletes all stored points.
SORT Sorts the name of User Points. Selections are:
a. A-Z ASCENDING : sorts the name of the Mark or Waypoint in ascending order
b. Z-A DESCENDING : sorts the name of the Mark or Waypoint in descending order