Operation Manual

CP590 Page 37
3. A popup window will be shown with a list of nearest Wrecks.
4. Move the ShuttlePoint knob to highlight the desired Wreck and press [ENT].
5. Another window will be shown detailing the Wreck information.
Figure 4.0.3a - Find Wrecks
6. Press [CLR] to show the actual position of the Wreck on the Chart page.
7. Press [CLR] again at any time to return your cursor to your vessel’s position.
4.0.4 Obstructions
This feature is used to locate the 20 nearest Obstructions to the position of your vessel.
An Obstruction is represented with an icon on the chart, see the following table:
Figure 4.0.4 - Obstruction Icons Table
1. Press [INFO].
2. Move the ShuttlePoint knob to highlight
OBSTRUCTIONS and press [ENT] or move the
ShuttlePoint knob to the right.
3. A popup window will be shown with a list of nearest Obstructions.
4. Move the ShuttlePoint knob to highlight the desired Obstruction and press [ENT].
5. Another window will be shown detailing the Obstruction information.
Figure 4.0.4a - Find Obstructions
6. Press [CLR] to show the actual position of the Obstruction on the Chart page.
7. Press [CLR] again at any time to return your cursor to your vessel’s position.