Operation Manual

Page 36 CP590
5. Another window will be shown detailing the selected Tide Station information.
Figure 4.0.2 - Find Tide Stations
6. Press [CLR] to show the actual position of the Tide Station on the Chart page.
7. Press [CLR] again at any time to return your cursor to your vessel’s position.
Figure 4.0.2a - Tide Graph page
Refer to the image above. The time displayed corresponds to the location of the cross-
hair cursor
in the Tide Graph . Moving the ShuttlePoint knob to the left or right
changes the time, and moving the ShuttlePoint knob up or down selects the Tide height and
Tide draught on the Tide Graph.
NOTE
The Local Offset matches the Time Offset entered in the Time Setup menu (see Par. 3.2)
4.0.3 Wrecks
This feature is used to locate the 20 nearest Wrecks to the position of your vessel. A Wreck
is represented with an icon on the chart. See the following table:
Figure 4.0.3 - Wreck icons table
1. Press [INFO].
2. Move the ShuttlePoint knob to highlight
WRECKS and press [ENT] or move the
ShuttlePoint knob to the right.