Operation Manual

CP590 Page 5
CLEANING PROCEDURE FOR THE CP590 SCREEN
Cleaning of the CP590 screen is a very important operation and must be done
carefully. Since the surface is covered by a antireflective coating, the procedure for
cleaning all the surfaces can be performed using the following procedure: use a clean,
soft, lint-free cloth to clean the glass. We recommend using a micro-fiber cloth. Spray
a small amount of ammonia-free cleaner (isopropyl alcohol) onto the cloth. Spraying
on the cloth will prevent overspray. Fold the cloth or lens cloth into a triangular shape,
moisten the tip and use the index finger behind a corner to move the cloth across the
surface in overlapping side to side strokes. If the cloth is too wet, a noticeable wet film
will be left in its path and you will need to repeat the process. If too dry, the cloth won’t
glide easily, and may damage the surface.
CAUTION
· The CP590 is designed for maritime use. To avoid water intrusion, ensure the C-MAP
B
Y JEPPESEN C-CARD door is completely closed.
· Extensive exposure to heat may result in damage to the CP590.
· The CP590 contains dangerous high-voltage circuits which only experienced technicians
can handle.
· STANDARD HORIZON will not be liable for errors contained herein, or for incidental
or consequential damages in connection with the performance or use of this material.
· Because we frequently update our software and applications, the pictures shown
through this Owner’s Manual may be slightly different from what you see.