Manualshelf

Operation Manual

ManualsBrandsStandard Horizon ManualsMarineCP590 - GPS Chart Plotter
21222324252627282930
CP590 Page 29
1. Press [MENU], move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].
2. Move the ShuttlePoint knob to highlight
GENERAL SETUP and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight
DISPLAY COLOR and press [ENT] or move the
ShuttlePoint knob to the right.
4. A popup window will be shown with
Normal, Classic, NOAA, Night and Sunlight. Move
the ShuttlePoint knob to the desired selection and press [ENT] or move the ShuttlePoint
knob to the right.
5. Press [CLR] or move the ShuttlePoint knob to the left to exit the menu and show the
Chart page.
Figure 3.4 - Display Color menu
3.5 SELECTING LANGUAGE
To ease operation in different countries, the software includes translation and display of the
following 16 languages:
· English · Italian · French
· German · Spanish · Norwegian
· Swedish · Portuguese · Chinese (Traditional)
· Danish · Dutch · Greek
· Finnish · Russian · Chinese (Simplified)
· Japanese
Multilanguage will display the digitized data in the charts as long as the source paper chart
was done in the national language. For instance, if a Chinese chart is digitized in English,
the digitized data will only display in English. However, if it was digitized in Chinese, then
the digitized data can display Chinese or English. The translations are included in menus,
data pages, warning/alarm messages, full/quick info, list of objects found by find/nearest
function, and on charts (such as place’s names and buoy’s names, etc.).
To select the language you want:
1. Press [MENU], move the ShuttlePoint knob to highlight
SETUP MENU and press [ENT].
2. Move the ShuttlePoint knob to highlight
GENERAL SETUP and press [ENT] or move
the ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight
LANGUAGE and press [ENT] or move the
ShuttlePoint knob to the right.
4. Another popup window will be shown with the available languages, move the Shuttle-
Point knob to the desired language and press [ENT] or move the ShuttlePoint knob to
the right.