Manualshelf

Operation Manual

ManualsBrandsStandard Horizon ManualsMarineCP590 - GPS Chart Plotter
11121314151617181920
Page 22 CP590
The GOTO key
· Starts navigation (goto) to a destination point.
· When pressed, a popup window will be shown allowing you to select to start navigation
to a Mark, a Route or the position of the cursor.
· To stop navigation, press [GOTO], select
STOP and press [ENT] in the popup window.
The MARK key
Places a Mark under the ship’s position when in Home Mode. When the cursor is shown and
[MARK] is pressed it will place a Mark under the location of the cursor.
The ROUTE key
· Places a Waypoint.
· Move the cursor and press [ROUTE] to place more Waypoints to form a Route.
The PWR key (Backlight and Contrast)
· Press and hold [PWR] to turn the CP590 On or Off.
· Once on, press [PWR] to show and change the Contrast and Backlight settings.
The MOB key
· Places a MOB (Man Over Board) mark on the Chart page under the boat’s position to
aid in the rescue or a person that may have fallen aboard.
· To delete MOB, press [MOB], select
DELETE and press [ENT] in the popup window.
The INFO key
Allows searching the C-MAP B
Y JEPPESEN NT
+
/MAX C-CARD for Port Services, Ports, Tide
Stations, Wrecks, Obstructions, Points Of Interest, Lakes Information, Lakes By Name,
User Points, GPS Coordinates or Information on any point on the chart.
The Soft Keys
The 6 keys in the bottom of the front panel (hereinafter named Soft Keys) have different
functions associated depending on the software: their labels are shown on the screen
immediately above the keys (the user can customize the function associated).
Figure 3.0 - Soft Keys
These keys allow quick selection to the many pages the CP590 has. These keys can be
customized to your preference, however from the factory the keys are preprogrammed with
the following pages, from left to right [V
IDEO], [NAV], [HIGHWAY], [CELEST], [CHART], [LIST].
Press any of the keys and you will see popup windows above the keys. To go to a specific
page press the key with the desired popup window. The popup windows will automatically
disappear if a key is not pressed or can be removed by pressing [CLR].