Operation Manual

Page 20 CP590
.[FULL VIEW2] : Shows the image from the video camera 2 at full screen.
. [PIP V
IEW1] : Shows the image from the video camera 1 on a window placed over
the selected CP590 page.
. [PIP V
IEW2] : Shows the image from the video camera 2 on a window placed over
the selected CP590 page.
.[A
UTO] : Shows the Soft Keys [FULL VIEW], [PIP VIEW] and [FULL+PIP].
.[F
ULL+PIP] : Shows the Soft Keys [1+PIP2] and [2+PIP 1].
If no video signal is detected on the Video Input connector, the Soft Keys will be shown
in gray and will not be selectable.
Quick Activation by Soft Keys
It is possible to assign the Video Input mode to any of the Soft Keys.
1. Press one of the Soft Keys, the Soft Keys labels are shown.
2. Pressing and holding for 1 second one of the Soft Keys, the Soft Keys customization list
will be shown.
3. Highlight
VIDEO INPUT and press [ENT] to assign the Soft Key to execute the Video
Input function. Once the Soft Key has been assigned to Video Input, its label will show
the message [V
IDEO].
4. If [V
IDEO] is pressed, the Soft Keys will be shown as explained in the previous case .