Operation Manual

Page 18 CP590

VHF Connections

To connect the CP590 to a VHF, a Port will be needed to be selected. Refer to Par. 2.4.2

“ACC2 Connector” for a connection example.

NOTE

The optional FF525 uses Port2 when connected and the optional Radar Antenna uses Port5. When

these optional devices are connected use Port1, Port2 or Port4 Input and Output to connect to the

VHF radio.

Some manufacturers of DSC VHF’s are not capable of receiving NMEA DSC sentences from the

CP590. Refer to the Owner’s Manual and confirm the VHF can receive NMEA DSC and DSE

sentences.

Video Input/Output

The CP590 has:

· One VGA Output

Allows connection to a compatible TV or monitor using the optional VGAC10

adapter cable.

· Two NTSC or PAL Video Inputs

NTSC or PAL video inputs allowing a camera, DVD or VCR. To connect a video

source use the optional ACVC10 cable (3 pin to RCA phone adapter).

VGAC10

GPS ANT

PWR & ACC 1

ACC 2

VIDEO OUT VIDEO IN 1 VIDEO IN 2

ACVC10

DVD Player

ACVC10

AVCV10 Video Adapter cable

CONNECTOR PINOUT

1 = GND

2 = PWR+

3 = SIGNAL